构建网络学习资源提高民族高校有机化学课程教学质量

High-quality online course materials were reconstructed through feedback from undergraduate students and online data analysis regarding constructed learning materials on the Chao Xing Learning Platform. They were used for studying organic chemistry courses online and offline in university for nationalities. This model, based on student-centered teaching, can effectively transform students from passively accepting knowledge to actively learning and internalizing knowledge. This strategy can also enhance the students' learning initiative and the effects of learning, and hopefully be helpful to the universities in multi-ethnic areas in developing fundamental disciplined construction of organic chemistry and other courses.     

A Review on the Potential and Limitations of Recyclable Thermosets for Structural Applications

Abstract

The outstanding performance of conventional thermosets arising from their covalently cross-linked networks directly results in a limited recyclability. The available commercial or close-to-commercial techniques facing this challenge can be divided into mechanical, thermal, and chemical processing. However, these methods typically require a high energy input and do not take the recycling of the thermoset matrix itself into account. Rather, they focus on retrieving the more valuable fibers, fillers, or substrates. To increase the circularity of thermoset products, many academic studies report potential solutions which require a reduced energy input by using degradable linkages or dynamic covalent bonds. However, the majority of these studies have limited potential for industrial implementation. This review aims to bridge the gap between the industrial and academic developments by focusing on those which are most relevant from a technological, sustainable and economic point of view. An overview is given of currently used approaches for the recycling of thermoset materials, the development of novel inherently recyclable thermosets and examples of possible applications that could reach the market in the near future.     

Properties of 8-Cyano-5-phenyl-7-trifluoromethyl-2,3-dihydroimidazo[1,2-a]pyridines

The alkylation, acylation, halogenation, nitration, oxidation, and hydrolysis reactions of 8-cyano-5-phenyl-7-trifluoromethyl-2,3-dihydroimidazo[1,2-a]pyridine have been studied. It was found that the 6-halo derivatives add alcohol to give covalent solvates. X-ray analysis has been carried out on one of the solvates (6-chloro-8-cyano-7-ethoxy-5-phenyl-7-trifluoromethyl-1,2,3,7-tetrahydroimidazo[1,2-a]pyridine) as well as on 8-cyano-5-phenyl-7-trifluoromethyl-2,3-dihydroimidazo[1,2-a]pyridine trifluoroacetate.     

Molar excess heat capacities and volumes for mixtures of alkanoates with cyclohexane at 25°C

Molar excess volumes V ^E at 25°C have been determined by vibrating-tube densimetry, as a function of mole fraction x for different series of an alkanoate (H _2m+1 C _m COOC _n H _2n+1 )+cyclohexane. Three types of alkanoates were investigated, i.e., methanoates (m=0, with n=3 and 4), ethanoates (m=1, with n=2, 3, and 4) and propanoates (m=2, with n=1, 2, and 3). In addition, a Picker flow calorimeter was used to obtain molar excess heat capacities C _p ^E at constant pressure at the same temperature. V ^E is positive for all systems and rather symmetric, with V ^E (x=0.5) amounting to almost identical values in a series of mixtures containing an alkanoate isomer of same formula (say C₄H₈O₂, C₅H₁₀O₂, or C₆H₁₂O₂). The composition dependence of C _p ^E is rather unusual in that two more or less marked minima are observed for most of the mixtures, especially when the alkanoate is a methanoate or an ethanoate. These results are discussed in terms of possible changes in conformation of both the ester and cyclohexane.     

Room Temperature Solid State Reaction Involving Structural Transformation of Covalent Oxide Network

An interesting structural transformation from a two dimensional (2d) covalent oxide network with a layered structure to a three-dimensional (3d) network with a tunnel structure was found at room temperature in the mixture of hydrated alkali-metal molybdenum bronze and amorphous alkali-metal molybdate. From various experimental results it was concluded that the transformation was due to a room temperature solid state reaction.     

Preparation and Characterization of Nanotitanium Dioxide Coating Film Doped with Fe^3＋ Ions on Porous Ceramic

The nanotitanium dioxide （TiO2） photocatalytic and porous ceramic filtering technique is one of the advanced methods to effectively treat organic wastewater. The TiO2 sol doped with Fe^3＋ ions was prepared by sol-gel processing. The influences of the process conditions of coating nanophotocatalytic material- Fe^3＋-TiO2 film on the surface of porous ceramic filter by dipping-lift method on the performance of porous ceramic filter were studied. The porous ceramic filters have two functions at the same time, filtration and photocatalytic degradation. The results of this study showed that the pH and viscosity of the sol, amount of Fe^3＋ ions doped as well as the coating times greatly affect the quality of coating film, the performance parameters and the photocatalytic activity of the porous ceramic filter. When the pH of the sol is 3-4, the viscosity is about 6 mPa.S, the amount of doped Fe^3＋ ions is about 2.0 g/L, the porous ceramic filter has been shown to have the best filtering performance and photocatalytic activity. In this condition, the porosity of porous ceramic is about 42.5%, the pore diameter is 8-10μm. The degradation of methyl-orange is 74.76% under lighting for 120 rain.     

Printed plastic electronics and paperlike displays

Plastic electronic materials and high‐resolution printing methods may be important technologies for new classes of consumer electronic devices that are lightweight, mechanically flexible and bendable, and that can cover large areas at low cost. This article summarizes some of our recent work in this area. It focuses on the materials and patterning techniques that we used to produce plastic active‐matrix backplane circuits for a type of paperlike display. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3327–3334, 2002     

Fe_3(CO)_9(μ_3-S)_2的P(SR)Cl_2和P(SR′)_3取代物的合成和结构研究

用P(SR)Cl_2和P(SR′)_3作n-酸配体,分别与Fe_3(CO)_9(μ_3-S)_2进行取代反应,得到6种新的一取代产物Fe_3(CO)_8(μ_3-S)_2L和3种新的二取代产物Fe_3(CO)_7(μ_3-S)_2L_2,并对它们进行了IR、~1H NMR和MS表征,测定了其中一种取代物Fe_3(CO)_8(μ_3-S)_2[P(SC_6H_5)Cl_2]的分子和晶体结构。     

Comparative studies on a mesophilic and a thermophilic α-amylase

A comparative study was performed on thermal stability of mesophilic and thermophilic α-amylases, and the effects of various denaturing agents, organic solvents, and stabilizers were investigated. As expected, the thermophilic enzyme showed higher resistance toward denaturation in water as its natural medium, but such a difference could not be detected in nonaqueous environments. Furthermore, stability of these molecules was improved by including various stabilizing agents. Of the compounds tested, sorbitol provided the highest degree of protection, which was found to be owing to its effect on increasing T _m and its ability in totally preventing deamidation of amino acid residues in the protein molecules.     

Enzymatic polyesterification in organic media. Enzyme-catalyzed synthesis of linear polyesters. I. Condensation polymerization of linear hydroxyesters. II. Ring-opening polymerization of ϵ-caprolactone

With the object to synthesize polyesters by enzymatic catalysis in organic media, two directions have been investigated: (1) the condensation polymerization of linear ω-hydroxyesters and (2) the ring-opening polymerization of lactones. The commercially-available crude porcine pancreatic lipase (PPL), suspended in organic solvents, was the preferred enzyme for the reactions. In order to determine the optimal conditions for the condensation polymerization, the bifunctional methyl 6-hydroxyhexanoate was used as a model compound to study the influence of the following parameters: type of the enzymecatalyst, kind of solvent, concentration, temperature, duration, size of the reaction mixture, and stirring. Film-forming polyesters with a degree of polymerization (DP) up to about 100 were obtained from linear aliphatic hydroxyesters in n-hexane at reflux temperature (69°C). Yet concurrently with the intermolecular condensation polymerization, macrolactones were also formed by intramolecular reaction. Two aromatic hydroxyesters did not react under these conditions. For the ring-opening polymerization of lactones the reaction of ?-caprolactone with methanol as the preferred nucleophile, was studied. Polyesters with a DP of up to 35 were obtained in n-hexane at temperatures between 25 and 40°C. The degrees of polymerization of the polyesters were determined by comparative analyses of the end groups in the ¹H-NMR spectra and by determination of molecular weights either by vapor phase osmometry, gel permeation chromatography, or intrinsic viscosity. © 1993 John Wiley & Sons, Inc.